You can rest assured to buy R&S FPL1014 Spectrum Analyzer from our factory and we will offer you the best after-sale service and timely delivery. In an RF lab, the R&S®FPL1000 family is as indispensable as an oscilloscope or multimeter. It is a single instrument for many measurement tasks. It can be used for spectrum analysis along with highly accurate power measurements for power sensors and analysis of analog and digitally modulated signals.
Models | Frequency range | Phase noise | DANL @ 1 GHz | Max. analysis bandwidth | Instrument type |
R&S®FPL1014 Order number 1304.0004.14 |
5 kHz - 14 GHz |
< -108 dBc (1 Hz) (f=1 Ghz, 10 kHz offset) |
< -160 dBm/Hz Pre-amp on | 40 MHz (FPL1-B40, and FPL1-B11) | Signal and spectrum analyzer |
Frequency range 5 kHz to 26.5 GHz
SSB phase noise: typ. –108 dBc (1 Hz) at 10 kHz
DANL with preamplifier: typ. –163 dBm from 10 MHz to 2 GHz
Lightweight with small footprint
40 MHz analysis bandwidth (option)
A single instrument for many types of measurements
You can use the R&S®FPL1000 for spectral measurements, highly accurate power measurements with power sensors and when analyzing analog and digitally modulated signals.
Measurement modes
The standard R&S®FPL1000 base unit supports various advanced spectrum measurement modes
Low phase noise and low displayed average noise level
Featuring a phase noise of typ. –108 dBc (1 Hz) at 10 kHz offset (1 GHz carrier), a third-order intercept point of typ. +20 dBm, 1 Hz to 10 MHz resolution bandwidth and typ. –163 dBm displayed average noise level, the R&S®FPL1000 is comparable to higher class analyzers. It is ideal for the lab, production and service tasks.
Phase noise measurement
Simple phase noise measurement with a marker function
Operation as intuitive as a smartphone
The touchscreen can be used for configuration and performing measurements. A one-finger swipe across the screen adjusts the center frequency or the reference level. A two-finger swipe adjusts the displayed span or level range.
Multiview of the R&S®FPL1000
The sequencer can perform spectrum measurements, adjacent channel power measurements, time domain measurements and spectrogram measurements
It can be used almost everywhere…
The low weight of 6 kg, optional battery pack for three hours of operation and carrying bag and shoulder harness mean you can use the R&S®FPL1000 signal and spectrum analyzer wherever you need it.
Carrying bag for the R&S®FPL1000
Optional R&S®FPL1000 carrying bag. The R&S®FPL1-B31 battery option allows operation while inside the bag.